DS1922E
iButton High-Temperature Logger with
8KB Data-Log Memory
Mission Start Delay Counter Register
ADDRESS
BIT 7
BIT 6
BIT 5
BIT 4
BIT 3
BIT 2
BIT 1
BIT 0
0216h
0217h
0218h
Delay Low Byte
Delay Center Byte
Delay High Byte
Note: During a mission, there is only read access to this register.
Mission Timestamp Register
ADDRESS
BIT 7
BIT 6
BIT 5
BIT 4
BIT 3
BIT 2
BIT 1
BIT 0
0219h
021Ah
0
0
10 Seconds
10 Minutes
Single Seconds
Single Minutes
021Bh
0
12/24
20 Hours
AM/PM
10 Hours
Single Hours
021Ch
0
0
10 Date
Single Date
021Dh
CENT
0
0
10 Months
Single Months
021Eh
10 Years
Single Years
Note: There is only read access to this register.
Mission Samples Counter Register
ADDRESS
BIT 7
BIT 6
BIT 5
BIT 4
BIT 3
BIT 2
BIT 1
BIT 0
0220h
0221h
0222h
Note: There is only read access to this register.
Mission Start Delay
The content of the Mission Start Delay Counter register
tells how many minutes must expire from the time a
mission was started until the first measurement of the
mission takes place (SUTA = 0) or until the device
starts testing the temperature for a temperature alarm
(SUTA = 1). The Mission Start Delay is stored as an
unsigned 24-bit integer number. The maximum delay is
16,777,215min, equivalent to 11,650 days or roughly
31yr. If the start delay is nonzero and the SUTA bit is
set to 1, first the delay must expire before the device
starts testing for temperature alarms to begin logging
data.
For a typical mission, the Mission Start Delay is 0. If a
mission is too long for a single DS1922E to store all
readings at the selected sample rate, one can use sev-
eral devices and set the Mission Start Delay for the sec-
ond device to start recording as soon as the memory of
the first device is full, and so on. The RO bit in the
Mission Control register (address 0213h) must be set to
0 to prevent overwriting of collected data once the
data-log memory is full.
Maxim Integrated
Low Byte
Center Byte
High Byte
Mission Timestamp
The Mission Timestamp register indicates the date and
time of the first temperature sample of the mission.
There is only read access to the Mission Timestamp
register.
Mission Progress Indicator
Depending on settings in the Mission Control register
(address 0213h), the DS1922E logs temperature in 8-bit
or 16-bit format. The Mission Samples Counter together
with the starting address and the logging format (8 or 16
bits) provide the information to identify valid blocks of
data that have been gathered during the current
(MIP = 1) or latest mission (MIP = 0). See the Data-Log
Memory Usage section for an illustration.
The number read from the mission samples counter
indicates how often the DS1922E woke up during a
mission to measure temperature. The number format is
24-bit unsigned integer. The mission samples counter
is reset through the Clear Memory command.
17
相关PDF资料
DS1922L-F5# IBUTTON TEMP LOGGER
DS1923-F5# IBUTTON TEMP/HUMIDITY LOGGER F5
DS1961S-F3# IBUTTON EEPROM 1KBit F3
DS1963S-F5+ IBUTTON MONETARY SHA-1
DS1971-F3+ IBUTTON EEPROM 256KBIT F3
DS1972-F3+ IBUTTON EEPROM 1KBit F3
DS1973-F3+ IBUTTON EEPROM 4KBit F3
DS1977-F5# IBUTTON EEPROM 32KBit F5
相关代理商/技术参数
DS1922F-F5# 功能描述:iButton DS1922 RoHS:否 存储类型:SRAM 存储容量:512 B 组织: 工作电源电压:3 V to 5.25 V 接口类型:1-Wire 最大工作温度:+ 85 C 尺寸:17.35 mm x 5.89 mm 封装 / 箱体:F5 MicroCan 制造商:Maxim Integrated
DS1922L 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:Temperature Logger iButton with 8KB Data-Log Memory
DS1922L_11 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:Temperature Logger iButton with 8KB Data-Log Memory
DS1922L-F5 功能描述:iButton RoHS:否 存储类型:SRAM 存储容量:512 B 组织: 工作电源电压:3 V to 5.25 V 接口类型:1-Wire 最大工作温度:+ 85 C 尺寸:17.35 mm x 5.89 mm 封装 / 箱体:F5 MicroCan 制造商:Maxim Integrated
DS1922L-F5# 功能描述:iButton Temp Logger Ibutton w/8Kb Datalog Mem RoHS:否 存储类型:SRAM 存储容量:512 B 组织: 工作电源电压:3 V to 5.25 V 接口类型:1-Wire 最大工作温度:+ 85 C 尺寸:17.35 mm x 5.89 mm 封装 / 箱体:F5 MicroCan 制造商:Maxim Integrated
DS1922L-F5#A20 功能描述:iButton RoHS:否 存储类型:SRAM 存储容量:512 B 组织: 工作电源电压:3 V to 5.25 V 接口类型:1-Wire 最大工作温度:+ 85 C 尺寸:17.35 mm x 5.89 mm 封装 / 箱体:F5 MicroCan 制造商:Maxim Integrated
DS1922L-F5#A22 功能描述:iButton RoHS:否 存储类型:SRAM 存储容量:512 B 组织: 工作电源电压:3 V to 5.25 V 接口类型:1-Wire 最大工作温度:+ 85 C 尺寸:17.35 mm x 5.89 mm 封装 / 箱体:F5 MicroCan 制造商:Maxim Integrated